Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Bedroom Window Blinds

    Posted by Dave on March 17, 2019 at 12:39 pm

    The window blinds in the bedroom quit working. I have no voltage what so ever on either switch for both blinds, on either side of the bed except for the illumination voltage, I’ve checked all breakers and fuses, as well as all the gfi(s) I can find, I seriously doubt if both blind motors went out at the same time. I just have to ask if any other Marathon owners of the 2003 vintage have experienced this and can give some direction.

    Thank you,

    Dave

    Archived replied 7 years, 5 months ago 10 Members · 12 Replies
  • 12 Replies
  • Harry

    Member
    March 17, 2019 at 1:01 pm

    Dave,

    Which breakers and fuse panels have you looked at ?

    AL

  • joel

    Member
    March 17, 2019 at 1:19 pm

    Everything I can find, I’m not even sure if they’re AC or DC, but I’ve checked the AC panels in the bay and the two in the bedroom as well as all the DC on the panel in bedroom, and checked all the DC circuit breakers and fuses in the driver’s door area, I’ve checked all the AC GFIs I can find and have tested voltage at all the surrounding plugs as well as the GFI plug voltages, and reset the GFIs that are on the breakers in the AC panels.


    1999 XLV X-6872,  liberty #440
  • Darrell

    Member
    March 17, 2019 at 4:35 pm

    Rather then a long message …call me

    AL

  • Archived

    Member
    March 17, 2019 at 10:00 pm

    I called Al, he gave me some things to check in an area in the rear closet, I will check this out in the morning and post the results. What a nice guy! I really appreciate the help, thank you Al!

  • Gerald

    Member
    March 18, 2019 at 7:51 pm

    Aren’t the blinds in your model controlled by Techlink switches?

  • Darrell

    Member
    March 19, 2019 at 12:12 am

    Threegreens,

    I guess I’m not sure what the Techlink switches are, we used to have that “Pronto” controller that would remotely control the blinds in the salon, and it had manual switches mounted by the door that control those as well. The only thing in the bedroom is just a couple switches (2 way) mounted on the wall on each side of the bed, nothing remote or wireless back there.

    We changed out coach batteries today, so I didn’t get a chance to investigate Al’s suggestions. I will tomorrow though.

  • joel

    Member
    March 19, 2019 at 7:32 am

    Those rocker switches in the bedroom on mine do not go through a Node Relay and must have an inline fuse somewhere.


    1999 XLV X-6872,  liberty #440
  • Archived

    Member
    March 19, 2019 at 11:05 pm

    Well now that I found the fuse (thanks to Boater Al) it seems like I might have already learned about how they use the fuses on the control(?) box a while back and forgot already.

    I’ve had this coach a little over 2 years ago and have only had it out a couple times, the last time was about a year and a half ago, there’s a lot to learn on these and taking too much time between uses doesn’t help, so I’m just going to have to make time to use it more. By the way the fuse was under the bed.

  • Art

    Member
    March 20, 2019 at 9:12 am

    I put batteries in house shut it down as marathon said converters came back up water pump bath heat fan in water closet instant hot kitchen heat gallery has not rebooted

  • Ed

    Member
    March 20, 2019 at 9:58 am

    Busman,

    Are there any errors on the inverter control panels? If not, maybe a main breaker on one of the panels in the bay or your inside panel, check the GFI breakers in the panels too.

    Hopefully someone else helps you here, that’s just where I’d start.

  • Roscoeapproved

    Member
    March 20, 2019 at 8:17 pm

    Enjoyed talking with you on the phone the other day.

    Thank You very much for very kind post.

    AL


    Jeff and Lindsay

    91 Marathon XL
  • Larry

    Member
    March 20, 2019 at 8:32 pm

    No luck I changed breakers in panel it all works bypassing modal have to turn on breakers when I want something on I have ordered mini on off switches to in stall in panel by inverter panel don’t want to mess with modular there are illunated

Log in to reply.