-
Anyone know a trick? Freshwater stuck on 100%
Coach just out of Marathon service, where among other things they worked on tank level sensors. Got it back with Fresh water on 100% – where it stayed for 4 days, while just using water from the tank. Finally, fresh water tank was empty (water pump spitting air; fresh water dump valve opened and no water left). Autofill would not operate. Tech support suggested turning off 12 and 24 volt disconnects for a minute and turning them back on to reboot Techlink. After that, had only Marathon Coach logo display, no info on any screens.
Suspect I need to take it back to Marathon; wondering if anyone had a suggestion for the weekend.
-
2 Replies
-
There is a sequential procedure for rebooting the Techlink. Disconnect shore power, Turn off 12v and 24v disconnects in engine bay, turn off house 12v &24V disconnects on ceiling in 3rd bay driver side. Reverse procedure to power up. Check that inverters are back on line and in proper settings.
-
Tried that, still have nothing but the Marathon logo displaying on Techlink. Suspect techlink CPU gave up the ghost. Thanks for the sequence. Luckily, still in Eugene.
Log in to reply.