Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Another good experience at ETLC!

    Posted by Archived on August 2, 2015 at 11:22 am

    I had an appointment at Jeff’s this past week to get some maintenance done. We did an inspection on the underneath side of the coach and fixed a couple of diverters for the cruise airs that had been bent up by the previous owner. This was the first time I had been under the coach and we looked at pretty much evertything. Overall it looks great Got it greased and then they replaced all the shock absorbers, Koni’s on the steering axle, OEM on the rest. There was evidence around the bottom of the fuel tank that something had been leaking. They found a couple of hose clamps at the top of the tank that were not completely tight, so they snugged them up and then wahed off the tank so it will be easier to see if it does it again. Also had Andrew, the Crestron guru come out and make changes so that ALL of our iPads work without conflicting with each other. It seems that Liberty had only set up the Crestron program to support one iPad. That is now fixed up so we can use them all (3) without issues. Andrew also repaired some other problems that exsisted in the Crestron programming so everything works as it should. He also added some items that Liberty had forgotten in the lighting catagory to the iPads. Since I have the coach connected to the internet, Andrew can log into it and make changes from his office now. That means a small change, such as a new Blu-Ray player or TV can be swapped without having to have him at the coach.

    Jeff was also able to fix a turn signal issue I had, and did some diagnostic work on the Mastervolt batteries. I had been having some problems earlier with the Mastervolt network shutting off the batteries. This results in a dead coach as the inverters need batteries to function. Jeff sent the info to Liberty on the batteries and it seems that they are good to go at this time. It is suspected that heat somehow was messing with the Mastervolt network as it was over 100 degrees each time I had the problem. I have lowered the charge rate that the inverters will charge the batteries, and so far that seems to be working. It will still need to be watched in the future.

    Being able to get this looked at during my visit at Jeff’s is saving me a trip to North Chicago for them to look at the issue. That is a real bonus! This is my third visit to Jeff’s and I have been very happy with the results each time. If you need something done, give him a call.

    Archived replied 11 years, 3 months ago 1 Member · 3 Replies
  • 3 Replies
  • Archived

    Member
    August 3, 2015 at 8:35 am

    Hey Mark,

    We were there at the same time, though we did like the bus was a kindergartener….we dropped and ran. We ended up going to Franklin so my daughter could see her boyfriend. They did a little work on my Crestron too, but had the wrong program from Liberty so most was untouched. When I return in a month or two I am going to have them fix the single iPad issue as I heard it went well for you.

    One thing I thought you may want to do, if possible, is have the inverters set up so that you can change their draw from the crestron. I had a bunch of upgrades done last year including new Outback inverters, so I am not sure if this is specific to them, but I now have three options on the inverter page for 220v/50A, 110v/50A, 110v/30A, so that I stop blowing as many breakers as possible.

  • Archived

    Member
    August 3, 2015 at 8:43 am

    If by blowing breakers you mean when on shore power, that tends to be an issue you have to manually control.

  • Archived

    Member
    August 3, 2015 at 5:34 pm

    My inverters are already setup that way…! I have had those options since the day I got it. I leave it on the lowest setting all the time since I rarely discharge the batteries, and since I was fighting a battery issue when it was hot out. Nobody is sure, but it is suspected that higher charge rates may have increased battery temps which caused the shut downs. Jeff ran diagnostics on the batteries while I was there, and Liberty says they are ok, so I will be keeping an eye on them just in case

    I will have to get a kickback from everyone they do the iPad fix for since I funded the programming ! It sure is nice now, no more issues with them interferring with one another. Andrew also fixed some things that did not work right, and some things Liberty missed in the iPad that was on the Crestron remotes. Overall, works great now.

    Hope you got your list completed. I know they were really working on it hard when I left on Thursday afternoon..

Log in to reply.