-
Air slide
My air slide works VERY slow on my ’99 H3 Vantare. I have not found how to access cylinder etc. to fix the problem. As I said, it is VERY slow coming out and even slower retracting.
I also want to mention I am a newbie so a lot of it might be because of my lack of knowledge. Any help will be much appreciated. Thanks.
-
2 Replies
-
Cliff
Under your seat in the front run box there will be a round black knob and a pressure gage. It controls the amount of pressure to your slide over the stairwell.
It is probably set to 30 or 40 lbs, push the black knob in and turn it so it releases and you can turn the knob clockwise to raise the pressure going to the slide.
My friend has your model coach and they seem to get stuck after leaving it at low pressure after a while. I raised his to 65lbs and exercised it until it moved freely and turned it back to 40lbs.
After you adjust it make sure you lock the knob back in.
You might have to pull the knob to unlock it to turn.
Later
bv -
Thanks for the input. I’ll give it a try.
Log in to reply.