Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • terry

    Member
    August 16, 2020 at 8:22 am

    You can run 2 AC’s on inverter power (bad idea) and yours may be setup to run the front AC and bedroom AC it varies by coach, that button allows you to switch from the bedroom AC to the galley AC, or vice versa.

  • Dick

    Member
    August 16, 2020 at 10:05 am

    Terry

    your bus like most have standard programming from marathon to run galley and bedroom cruise air off inverters. The “A/C Select” allows further modification based on how coach was originally programmed

    standard alternative programming running galley and bedroom by pressing “select button with bedroom on, will switch things making “salon” cruise to operate. In order to have this happen, the bedroom button must be depressed, then depress A/C select, and SMX salon keypad must be on as well. You can experiment by just operating SMX pad for salon before depressin A/C Select. If SMX goes dark, then restart procedure with bed and galley running, then depress select button and turn on salon, and smx should blink, yet stay lit meaning transfer of operation is complete switching from running bedroom unit to salon

  • Art

    Member
    August 16, 2020 at 12:29 pm

    Thanks for the info. I do not run off the inverters. I want to baby them to maybe extend the life. Always shore or genset. Thanks again to everyone.

Log in to reply.