Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • 8v92 270 amp alternator from hell

    Posted by Archived on June 5, 2014 at 11:58 pm

    When my chassis batteries are fully charged and have a surface charge on them, my alternator surges from 24 to about 27.5 volts causing all chassis lights and blowers to surge accordingly. It is like the alternator doesn’t know what to do with the charge. If I turn shore power off about six hours before departure, this doesn’t happen. It alos occurs intermittantly during a long drive regardless of departure status. Any suggestions fellas?

    thank you.

    Archived replied 12 years, 5 months ago 1 Member · 2 Replies
  • 2 Replies
  • Archived

    Member
    June 6, 2014 at 6:54 am

    Bill, it might be your alternator is not surging, but is in fact turning on and off.

    The 27.5 volts is where I would expect your alternator output to be. My guess is your alternator is not producing output and then all of a sudden it starts charging again. I would look for loose connections, especially the field wire at the alternator because those have had a history of failing. If the terminals are tight, no corrosion, wires in good shape, etc, consider the voltage regulator might be bad,

    Before you go to a lot of trouble put the meter on the bus when the engine is not running and see what voltage you have, then start it up and expect to see it jump to 27.5 and hold steady. My guess is it will not do that every time.

  • Archived

    Member
    June 6, 2014 at 9:08 am

    Jon, has hinted at the possible solution. The field wire is at the 12 0’clock position on the back of the alternator.

    Vibration and not tight crimp cause this connection to become loose. Put your finger on the wire and in some cases you can pull the wire right out of the crimp socket.

    If this be the case thank me not Jon, he had chicken and dumplings yesterday and I’am still thinking about it.

Log in to reply.