Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Polybutylene Gray Water Pipes

    Posted by Archived on March 20, 2013 at 9:35 am

    I thought it might be worth starting a new thread from one that
    led to a discussion about the flexible gray pipe used by many converters for
    the fresh water systems. This product is most likely Polybutylene. Due to a
    high number of failures in the housing industry and a huge class action suit
    win, this product stopped production many years ago.

    There’s probably not a big concern in your coach application to
    do what most home owners did and that’s total replacement of the gray pipe. The
    failures were a result on one of three factors or a combination of those
    factors. UV exposure (not a problem in a coach application), crimp style
    fittings (maybe a problem with coaches) and prolonged exposure to chlorine (be
    careful when sanitizing your water system).

    The bad news is you can’t find new replacement Poly-B and even
    worse Poly-B fittings are no longer available.
    It’s not all bad news though.
    Zurn’s PEX product is a similar although different product than
    Poly-B. It comes in red, blue, and milky
    white. It’s has a high heat tolerance
    allowing it to be used directly attached to hot water heaters. Just keep in mind that PEX and Poly-B
    connectors are not compatible.

    If you have a fitting failure or need to add to your water
    system there are conversion fittings.
    Shark Bite brank makes a conversion fitting that requires no tools
    although you need to have a clean cutting tool.
    They are a bit pricy, but are effective.
    Here’s an example: http://www.sharkbiteplumbing.com/sharkbite-u4008lf-polybutylene-conversion-coupling-1-2-x-1-2-lead-free

    Another conversion fitting is a crimp on style. These use an inexpensive copper crimp ring or
    an expensive stainless ring. There are
    special tools used to crimp these connectors and range from over $150.00 to as
    little as $25.00. The $25.00 one
    requires the use of a 10” vise grip.
    Here’s an example of one of these conversion fittings: http://www.pexsupply.com/HydroPEX-H140500-1-2-PEX-x-1-2-PB-Coupling-5339000-p
    and crimp ring tools: http://www.pexsupply.com/PEX-Crimp-Tools-Rings-693000
    .

    Flair-It may have conversion fittings, although a quick web
    search only led to finding ¾” conversion adapter insert. Quest may be another source, although I didn’t
    uncover anything doing a web search.

    Archived replied 13 years, 8 months ago 1 Member · 0 Replies
  • 0 Replies

Sorry, there were no replies found.

Log in to reply.