-
Relative to some of the other things i had to do, i would say it was easy. First step is parking the bus with the wheel as straight as you can get it. Pull the horn cover off, Loosen the nut, I took an aluminum bar 3/8″ x 1″ x 3″ long and drilled 2 holes in it to pull the wheel off the shaft. Next I assembled the wheel and hub kit, dropped it over the shaft, put the nut on and torqued it down. All in all it took me maybe 2 hours and 3 cups of coffee. The driving experience is very different now. I have always been a fan of my Brody knob, i don’t think i need it with this smaller wheel.