-
Update:
– checked the regulator and connections = tight, reset both breakers, manually and remote started the gen, no issues.
– remote inverters display show on Inv 1 = 119V and Inv 2 = 0 and no charging
– remote Marathon display on dash shows both Inv 1 and 2 at 119V with amps consumption on Inv 1 and 0 amps consumption on Inv 2.
Breakers should be good but tried to source couple with no luck, here are the numbers:
Top – IULHK11-224-14, 15 Amps, 250V, 50/60HZ, Delay 62, Trip 18.8Amps
Bottom – IALHK11-224-30, 80Amps, 240V, 50/60HZ, Delay 62
Not sure why the Marathon will show a charge but not the inverters?
Any additional input on this is appreciated!
Thank you!