Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Archived

    Member
    March 13, 2018 at 9:08 am

    Go for it Tim and pay no attention to Buddy, he’s been in Vonore so long he has now resorted to hugging his generator.

  • Archived

    Member
    March 13, 2018 at 9:57 am

    I tell you the spies around here are too many to keep up with.

    I’m surprised they don’t have a pick of me on the sh&%@er.

    If I am going to be on public display then rotate my picture so I can show my best side.

  • Archived

    Member
    March 13, 2018 at 10:19 am

    Shitter picture, no problem..

  • AL

    Member
    March 13, 2018 at 5:16 pm

    Tom, you have pictures for every occasion!

  • Dick

    Member
    March 13, 2018 at 5:36 pm

    I’ve studied this generator picture a couple of times….just for hell of it; could you tell use what your doing in the generator bay?

  • Dick

    Member
    March 13, 2018 at 6:53 pm

    I wondered the same thing that Al asked. I’m also interested in how Buddy got in there. Did Jeff’s guys lift the coach and drop it down over him? Has Buddy set up housekeeping in there?

  • Per

    Member
    March 13, 2018 at 6:57 pm

    Its kind of a story but I have a leak in one of the heads on my air compressor and to get to the head you have to remove the air genny air cleaner assembly.

    So when I did that one of the nuts on the bottom side of the air cleaner fell down into the genny. So now I had to take the back off the genny and try to find the nut that fell off, which I can’t find.

    So now I am going to have to go back in when it gets a little warmer and take part of the genny apart and see if I can find the nut.

    Tried a magnet on a long stem, my hand held camera on the end of a flexible shaft and removed part of the bracket that holds the brushes on the end of the armature or the exciter coils, not sure what they are just yet.

  • AL

    Member
    March 13, 2018 at 8:34 pm

    Buddy,

    Do you have access to a bore scope ?

    AL

  • Rudy

    Member
    March 13, 2018 at 8:38 pm

    I do. Thatnis what I was using, its made by Milwaukee.

    The video is not very good on those things.

  • Archived

    Member
    March 13, 2018 at 9:42 pm

    …Showing picture as I can’t make out what you have laying on top of generator. Cord is 3 feet long…with adjustable screen plus head light.

  • Tim

    Member
    March 14, 2018 at 5:58 pm

    I found the nut. It’s wearing a Babe’s hat.

  • Dick

    Member
    March 14, 2018 at 9:57 pm

    Buddy,

    I like your Babe’s hat. They do a good job on their fried chicken.

    Reese

  • Doug

    Member
    June 27, 2018 at 12:39 pm

    Bus Sold Today!

    Now we’ll be on the look-out for Bus #2. But first, back to the farm, then fall Harvest. Hope to locate our dream bus by January ’19!

    Stay tuned …

  • Deleted User

    Deleted User
    June 27, 2018 at 12:52 pm

    Tim,

    Best of luck on your search! Keep us posted.

    Doug

  • Gerald

    Member
    June 27, 2018 at 12:55 pm

    Congrats Tim, someone is getting a very nice bus. Good hunting!

Page 2 of 3

Log in to reply.