Prevost Community Forums

Find answers, ask questions, and connect with our
Prevost Community around the world.

  • Main belt tensioner replacement

    Posted by Walter on May 11, 2020 at 4:45 pm

    Hi All,

    I discovered the main alternator belt (that wide serpentine one) was broken. Of course, i don’t know when it broke or did I know why ( I know why now…) which bugs me for certain.

    Anyway – I got a new belt, put it on and fired her up – SCREEHY SQUEEEEK!!! So I run back there and sure enough, the tensioner roller is stuck. I run back up and turn her off.

    Now, I have the tensioner off – where do you guys recommend is the right place to call and get another at a reasonable cost and quickly (not overnight or anything… )

    This thing –

    Thanks – in advance all!

    Jon replied 4 years, 7 months ago 19 Members · 26 Replies
  • 26 Replies
  • DON

    Member
    May 11, 2020 at 4:58 pm
  • terry

    Member
    May 11, 2020 at 5:24 pm

    Here is what’s on my bus, DD 60 series. Autozone sells Dayco Products, or amazon and ebay.

    The spring loaded tensioner arm w/idler is Dayco#89417 or DD#23533015

    The other day I saw on ebay the complete alternator belt tensioner kit #23527060 for $650. Detroit gets $1600 for the same thing.

  • Mike/Lisa

    Member
    May 11, 2020 at 8:49 pm

    The part number helped a lot! Thank you! There isn’t any info on the part itself (of course)

    180 on Amazon. We’ll see if it’s right. Now…. trying to find another belt. Got the part number… but it’s not as easy…

  • Archived

    Member
    May 11, 2020 at 9:59 pm

    Here is what I have belt part#s:

    Replacement belt #s are: DD 23521000, Gates K120738 or K120738HD, Goodyear 4120738, Cummins 3098369, ACDelco K120738HD, Dayco 5120738

  • rafael

    Member
    May 12, 2020 at 7:29 am

    Don,

    You get the award for the best looking engine compartment I’ve seen.

  • John

    Member
    May 12, 2020 at 7:43 am

    You would think it has never been driven, unbelievable

  • Walter

    Member
    May 12, 2020 at 8:53 am

    I was gonna say the same incredible how clean that engine compartment is, I drive my bus around the block and it picks up a ton of dirt and dust all over the bay. What’s the secret Don

  • Dick

    Member
    May 12, 2020 at 9:07 am

    Look at the date stamp on that engine photo. It’s from Sept 2018, immediately after I repainted it. Its not that pretty anymore

  • DON

    Member
    May 12, 2020 at 12:00 pm

    The only thing in my engine compartment that’s gonna look that clean is a belt tensioner and an alternator belt!

  • Dick

    Member
    May 12, 2020 at 4:03 pm

    Don: Post a “today” picture so we can see how its aged. Nice job.

  • DON

    Member
    May 12, 2020 at 8:44 pm
  • Art

    Member
    May 13, 2020 at 9:02 am

    Taken this AM

  • Billy

    Member
    May 13, 2020 at 9:29 am

    My engine compartment looks ok, But Don went all the way,looks awesome, Craig Wickham did a complete job on his also, engine color my paint says Detroit series 60 blue, I don’t know which one is correct?

  • Rocky And Tonya

    Member
    May 13, 2020 at 1:17 pm

    Don: Do you have plans for polishing what looks like a copper fitting and tube coming off the OTR A/C compressor?

  • David

    Member
    May 13, 2020 at 1:52 pm

    Dick, Shame on this Liberty owner for not polishing all the copper pipes.

    Art, I used

    DupliColor Engine Paint #1618. It’s called DD Aspen Green.

    I like the way I looks better than the blue.

Page 1 of 2

Log in to reply.