• Plumbing

  How Do I Reset My Holding Tank Monitors?

  Posted by Archived on January 21, 2017 at 2:26 pm

  Ok community,

  I’ve got Sentry tanks, and a monitoring system in the galley. Having looked through my Sentry manual, it tells me to start turning green trimpots and red trimpots, but the diagram doesn’t say anything about a trimpot. And, looking through my plumbing bay, nothing looks green. The only red is self explanatory stuff… Not trimpots.

  Thanks,

  David

  Bernie replied 9 years, 9 months ago 3 Members · 3 Replies
• 3 Replies

• 

  Corey

  Member

  January 22, 2017 at 12:42 am

  Tank monitors are historically problematic and inaccurate. We have owned 6 Prevost’s from several converters and they all have been a problem. We use a fail-safe visual sight glass on both the holding and fresh water tanks. 100 percent accurate every time!

• 

  Archived

  Member

  January 22, 2017 at 7:07 am

  The resets for the levels are on the back of the panel you unscrew it and look on back , if it’s a head hunter panel, to reset it for empty you can unplug the air hose from the brain box , also the tube that goes in the tank to measure head pressure can get clogged you can unplug it and blow some air down the tube into the tank

• 

  Bernie

  Member

  January 29, 2017 at 11:47 am

  Thank you! I’ll go check that right now….

Log In to Reply