Rocky,
One of the most confusing parts of ownership is to learn to not look at the coach as a whole.
None of our coaches are a single device. We have a Prevost chassis, and we have a house built inside it. Liberty joins with the chassis in only a couple of places, one being electrically where an engine driven alternator is used to supply electrical power to the house for the batteries. The other is where Prevost denotes it is appropriate for the converter to attach to the pneumatic system. There are minor connections like fuel for the generator, the Webasto, but you understand what I mean.
So to refer back to your question you have mixed chassis and house electrical. So your question has to be considered in the context of you first isolate the chassis and house, and then ask questions specific to one or the other. I can say this about both. Prevost and Liberty have both done an excellent job of identifying wires, and in the case of Prevost there will be listings of every CB, relay, fuse, etc. on the door panel for the respective electric boxes, front and rear. You can pull up the Prevost service manual and wiring diagrams for your coach on the Prevost publications page in the link below.
Liberty has likewise made identifying electical components easy. Every device that has wires going to it will have numbers on the wires. The corresponding numbers at the other end of the wire will be in the electrical bay, second back, driver’s side. If there are relays involved the wires to the relay will also be identified. The wires to and from the switches will be numbered so along the entire electrical path on the Liberty wiring will be numbers. If you have a 24 volt coach identifying circuits is not as easy as the 12 volt coaches, but learning how to identifying those circuirs through the Allen Bradley system is also easy.
https://secureus5.volvo.com/technicalpublications/en/manuel.asp