-
Electrical Plugs
Got my new fuel bowl and water sensor and I will have to replace the plug ends on sensors.The new sensor has no plug on it I’m sure I can’t match what is on bus side plug ,so best put new female plug on bus side and I will need 2 male plugs for the 2 bowls. Here is a picture of a cheap sensor I bought on e-bay for 10 bucks wrong plug but if I could get more plugs like this one I would be good, where can I buy auto style plugs??
-
6 Replies
-
Have one of these if you need to check um.
-
Just cut the plug off and connect wires to the old plug.
-
I have 2 bowls and 2 sensors so i need 2 sets of plugs for bowls 1 for bus, So when I change filters the spare is filled and ready to go.
-
Here is sensor for primary fuel filter, I read the sensor reads OHMS how does it tell fuel or water?? Here is the kind of plug I ordered Delphi brand and new bowl and sensor.
1999 XLV X-6872, liberty #440 -
Looks to me that when you have enough water in the bowl the two pins make contact and turn on a light somewhere.
-
Looks to me that when you have enough water in the bowl the two pins make contact and turn on a light somewhere.
Log in to reply.