-
One blind reversed
Last week I went to topen my blinds in the salon. Blind #3 got hung up outside of the frame near the end of its travel. I released it quickly, but a pexuliar thing has happened. That blind is on the opposite cycle of all of the others! I have reset the start and end points of the blind, but I really need to know how to get it back in sync.
Ideas?
-
7 Replies
-
Liberty needs to answer that, but my first attempt before phoning would be to unplug the blind that is out of sync, run the others up or down, then replug the blind.
-
I have one that the exact same thing Karl, wound around and now the close opens and the open closes. Mine don’t have string, so I’m going to remove it and correct on the work bench with power then place it back.
-
Tom is correct that the blind more than likely has flipped over at the up limit end.
-
I’m thinking you’re right, Jeff, because jogging it to put it in blackout mode has the slats going in thw wrong direction. How do I fix?
-
Figured it out! And Tom and Jeff were right, mostly. I had the limit buttons reversed when I originally tried to fix them. Now it works as before. Thanks all.
-
Hmm, operator error, mostly.:)
-
Yup, you could say that! 😉
Log in to reply.