-
Pressure Pro Tidbits
I’ve had a lot of quesions about the Pressure Pro system, so here’s a few comments on what you will need. If want to order, please contact me via e-mail or phone. For the 8 sensor system it’s 655.00 or the 12 is 845.00.
16W Monitor – This is the display and menu function for the system that you mount in the dash area. It’s 12v and can be ordered with a plug or stripped wire, depending on whether you want to hard wire or just plug in.
Repeater – A repeater will be needed because of the bus length and stainless. Even if you have an H, you still need the repeater. It’s mounted somewhere in the rear of the coach and it also 12v. Like the Monitor, you can order with a plug or stripped wire for hard wiring.
Sensors – You will need 1 sensor per wheel and they just screw on the valve stem replacing the cap. So you need 8 sensors (bus only) or 12 if you’re including the toad or trailer. The Monitor will handle up to 16 sensors.
For more info, go to Pressure Pro’s website: Pressure Pro
-
12 Replies
-
Hey Tom,
I purchased a pressure Pro system a short while ago for my HR Navigator but fortunately never installed them and more fortunately never had a tire issue.
Now that I am lucky enough to be driving a Prevost I will definitely be installing them on the coach, my Jeep and a trailer I have coming. Unfortunately I am back home at work and the coach is in Sarasota waiting for me to pick it up which I intend to do once the weather improves. That will probably be in May considering the amount of snow we still have.
The pressure pro system is in the coach so once I get there I will see what is there for sensors and if I ordered the repeater. I will send you an email with all the items I will need and would appreciate any suggestions you may have.
Regards, Mike
ps: got the starter solenoid taken care of at Donnie Myers as well as a few more items my wife and I saw and just had to have. Next time you see us parked at night, you will see what I mean.
-
Good to hear you got the starter fixed up Mike. When you get back to the bus, just let me know what you need. Sounds like there are a few LED’s to display.;)
-
Tom,
I will be heading back down in May so will give you a heads up as to what I need. Do you usually keep most items with you or do you order as needed.
Mike
-
Order as needed Mike, usually ships same day UPS.
-
Sounds good Tom. I will advise soon as I get down there and yes there are some new LED additions – both inside and out.
Mike
-
Hey gang, Pressure Pro now has a special going for sensors. They were 500 each, but now 390. Big savings for 8 or 12 sensors. Don’t know how long it will last.
Monitor, Repeater and 8 sensors 5670
Monitor, Repeater and 12 sensors 7130
Contact me if you want to order…
-
Hey Tom,
At $ 40 bucks each that’s a good price. Put me down for four sensors. How do I get you paid?
-
E-mail direct… If you’re just ordering sensors, you’re just as well off ordering them direct from Pressure Pro. Pressure Pro
-
Tom,
I already have the monitor and repeater so I will place the sensor order direct. Thanks for the advice.
-
My coach is at Marathon Coach in Oregon. They are installing the Pressure Pro system today and scheduled to leave for Buffalo, NY tomorrow. They just called and said I need a 6 foot remote antenna extension to read the rear tires. Marathon Coach read the instructions and said the repeater is installed in the toad. I told them the repeater should be in the back of the bus for the rear tires…not the toad…True?
With the repeater on the back of the bus, will it read the toad tires? Thank you.
-
I installed our repeater in the closet at the back of our coach. Very easy as there was already a 12v source available.
Zero problems reading the rear coach tire pressures or the toad.
Good luck with your installation….
-
my repeater is in back closet it works great for my trailer
Log in to reply.